MBC36GR

Overview

The Atosa MBC36GR is a horizontal bottle cooler for keeping bottled beverages chilled at a bar, restaurant, lounge or other foodservice operation. Its 7.7 cu. ft. interior provides space for beverage storage, with two wire dividers included to separate or organize bottles. The unit has a stainless steel exterior and interior, and stainless steel lids that slide open for access.

An electronic temperature controller regulates the cooler, which maintains temperatures between 35°F and 38°F. A heavy-duty Embraco compressor uses R290 refrigerant. The compressor assembly slides out for easier maintenance access.

Key Features

• Stainless steel construction: The exterior and interior are stainless steel, and the sliding lids are also stainless steel.
• Temperature control: An electronic temperature controller maintains the stated 35°F–38°F range.
• Sliding, locking lids: Easy-glide lids have handles, and lid locks are standard.
• Included bottle-service details: A bottle opener and cap catcher come standard.
• Interior organization: Two wire dividers are included.
• Service access: The compressor assembly slides out for maintenance.
• Pre-installed casters: The cooler comes with casters already installed.

Specifications

• Brand: Atosa
• Model: MBC36GR
• Equipment type: Horizontal bottle cooler
• Capacity: 7.7 cu. ft.
• Exterior dimensions: 36 3/4 in. W × 26 3/4 in. D × 38 1/2 in. H
• Temperature range: 35°F–38°F
• Exterior: Stainless steel
• Interior: Stainless steel
• Lids: Stainless steel, easy-glide, with handles and locks
• Wire dividers: 2
• Included bottle-service features: Bottle opener and cap catcher
• Casters: Pre-installed, 2 in.
• Controller: Electronic temperature controller
• Compressor: Heavy-duty Embraco
• Compressor access: Slide-out assembly
• Refrigerant: R290
• Electrical: 115V / 60Hz / 1 phase
• Amperage: 2.3 A
• Compressor horsepower: 1/7 HP
• Plug: NEMA 5-15P
• Electrical rating shown: NEMA 15A/125V
• Net weight: 170 lb.
• Gross weight: 207 lb.

Installation & Requirements

The MBC36GR requires a 115V, 60Hz, single-phase electrical supply. The specification sheet identifies a NEMA 5-15P plug and NEMA 15A/125V electrical rating. Confirm that the intended electrical connection is suitable for these specifications before placing the unit into service.

Atosa’s product information advises leaving the unit room to breathe. The available specification sheet does not give a numerical clearance requirement, so consult the product documentation for any site-specific spacing instructions.

Operation

Use the electronic temperature controller to operate the cooler within its stated 35°F–38°F range. Atosa recommends setting the refrigerator between 35°F and 38°F for best food preservation. The sliding lids provide access to the stored bottles; their standard locks allow the lids to be secured when required. The two wire dividers help keep the interior organized, while the bottle opener and cap catcher support bottle service at the cooler.

Cleaning & Maintenance

Atosa advises cleaning the condenser frequently to give the unit more fresh air. The specification sheet does not provide a cleaning method or a specific interval. The compressor assembly slides out for easier maintenance access. For service or care procedures beyond these points, refer to the documentation supplied for the unit.

Applications

The MBC36GR suits beverage storage and service in commercial bar and foodservice settings. Its horizontal layout, sliding lids and included bottle opener and cap catcher are useful where staff need access to chilled bottles during service. The 7.7 cu. ft. capacity and two dividers provide an organized storage area; the sources do not state a bottle-count capacity.