MBF8519GR

Overview

The Atosa MBF8519GR is a one-section, low-height, bottom-mount reach-in refrigerator for commercial food storage. Its 8.3 cu. ft. capacity and compact 24 1/4 in. W x 24 in. D x 63 1/4 in. H footprint make it an option for kitchens that need refrigerated storage in a narrower space or under a lower ceiling than a full-height reach-in allows. The single right-side door opens to three adjustable shelves, so operators can arrange the interior around the size and type of stored items.

The refrigeration system uses R290 refrigerant and a bottom-mounted compressor. The stainless steel exterior and interior, electronic temperature controller, LED interior light, magnetic door gasket and standard door lock are part of the unit’s listed features. Atosa’s specification sheet describes down-duct refrigeration for air distribution and recommends a refrigerator setting between 35°F and 38°F for food preservation.

Key Features

• Compact capacity: 8.3 cu. ft. of storage in a low-height, one-section cabinet.
• Bottom-mounted refrigeration: The compressor is located at the bottom of the cabinet; the system uses R290 refrigerant.
• Adjustable storage: Three pre-installed shelves are provided. Additional shelves are listed as an optional accessory for this model.
• Interior visibility: LED lighting helps illuminate stored products.
• Door security and sealing: The door has a standard lock and magnetic gasket. Atosa’s sheet also identifies a self-closing and stay-open door feature.
• Temperature control: An electronic controller manages cabinet temperature. Atosa recommends a 35°F to 38°F setting for food preservation; product listings state a 33°F to 40°F temperature range.
• Mobile setup: Pre-installed casters are listed as a standard feature.
• Air distribution: Down-duct refrigeration is listed to help distribute air through the cabinet.

Specifications

• Brand: Atosa
• Model: MBF8519GR
• Equipment type: Bottom-mount, one-section, one-door low-height reach-in refrigerator
• Capacity: 8.3 cu. ft.
• Exterior dimensions: 24 1/4 in. W x 24 in. D x 63 1/4 in. H
• Door: One right-side door
• Shelves: Three, adjustable; epoxy shelves are listed in the specification sheet
• Maximum shelf load: 176 lb, as stated in the provided manual
• Exterior and interior: Stainless steel
• Electrical: 115V, 60Hz, single-phase
• Rated current: 2.1 A
• Input power: 250 W, as stated in the provided manual
• Horsepower: 1/7 HP
• Plug: NEMA 5-15P; the specification sheet also lists NEMA 15A/125V
• Refrigerant: R290
• Refrigerant charge: 3.9 oz, as stated in the provided manual
• Temperature: Product listings state 33°F to 40°F; Atosa recommends setting the refrigerator between 35°F and 38°F for food preservation
• Net weight: 176 lb

Installation & Requirements

Electrical connection

The provided manual identifies the MBF8519GR power supply as 115V/60Hz/1Ph and states that the supply voltage should remain within +/-10% of the unit’s rated voltage for proper operation. The refrigerator is supplied with a power cable. The manual calls for a suitable thermomagnetic circuit breaker, which is not supplied, between the mains power point and the refrigerator’s power cable. It says this electrical work and the connection should be carried out by professionally qualified persons, and that the electrical system must meet current requirements and be suitable for the unit’s rated electrical output.

Placement and refrigerant safety

The manual advises placing the refrigerator in the coolest, best-ventilated part of the room, away from heat and direct sunlight. It warns operators to keep ventilation openings clear, not to damage the refrigerant circuit and not to use mechanical devices or other means to speed defrosting except those recommended by the manufacturer. The manual identifies R290 as a flammable refrigerant and cautions against using electrical appliances inside the food-storage compartments unless they are of a type recommended by the manufacturer. The Atosa specification sheet also reminds users to leave the unit room to breathe.

Operation

Use the electronic temperature controller to manage cabinet temperature. Atosa recommends setting the refrigerator between 35°F and 38°F for food preservation. Product listings give a 33°F to 40°F temperature range; use the equipment’s controller instructions for the operating steps and settings. The supplied manual refers operators to the attached digital-control-unit instructions for controller parameters and warns not to change the microcomputer parameters privately, as changes may damage the compressor unit or other functions.

The refrigerator has LED interior lighting, a magnetic door gasket and a standard door lock. Its three shelves can be adjusted to suit stored products, subject to the manual’s stated maximum shelf load of 176 lb. The specification sheet lists a self-closing and stay-open door feature. The manufacturer’s sheet describes down-duct refrigeration for air distribution and recommends keeping the refrigerator’s condenser clean so it can receive fresh air.

Cleaning & Maintenance

The provided manual recommends regular cleaning of the refrigerator unit each month. It instructs users to clean the cabinet with a mild detergent and dry it with a soft cloth. Its cleaning procedure begins with disconnecting the refrigerator; disconnect the unit before cleaning, and follow the complete equipment manual for the remaining cleaning steps. Atosa’s specification sheet separately advises cleaning the condenser frequently. The sources do not specify a more precise condenser-cleaning interval.

Keep the ventilation openings clear and avoid damaging the refrigerant circuit during cleaning or service. The manual warns that component parts should be replaced with like components and that servicing should be performed by factory-authorized service personnel. It also cautions against unauthorized modification, tampering and the use of non-original spare parts.

Applications

The MBF8519GR can suit commercial kitchens and food-service areas that need a small, enclosed refrigerator for ingredients, prepared items or other refrigerated supplies. Its narrow cabinet and low-height format may be useful in a compact prep area, café, concession setting or back-of-house station where a larger reach-in would take up too much floor space. The adjustable shelves allow storage to be arranged for different product sizes, while the lock provides a way to secure the cabinet contents when needed.