SBB69GRAUS1

Overview

The Atosa SBB69GRAUS1 is a shallow-depth back bar cooler for refrigerated storage in bar service areas and commercial kitchens. It has two solid swing doors and a stated capacity of 18.6 cu. ft. Its overall dimensions are 68 inches wide, 24 1/2 inches deep, and 40 1/8 inches high. The stainless steel exterior and interior give the cabinet a consistent finish inside and out, while the shallow-depth format suits layouts where a full-depth refrigerator may not fit the available space.

Inside, the cooler comes with four pre-installed epoxy-coated shelves. The doors have magnetic gaskets and standard locks, and an interior light helps illuminate stored contents when the doors are open. An electronic temperature controller and a heavy-duty compressor using R290 refrigerant are among the specified refrigeration components.

Key Features

• Shallow-depth cabinet: The unit measures 24 1/2 inches deep, with an overall width of 68 inches and height of 40 1/8 inches.
• 18.6 cu. ft. capacity: Provides refrigerated storage in a two-door back bar format.
• Stainless steel interior and exterior: Stainless steel surfaces are specified for both the inside and outside of the cabinet.
• Four pre-installed shelves: The supplied shelves are epoxy coated.
• Electronic temperature controller: The controller is part of the cooler’s refrigeration system.
• Specified holding range: Atosa states that the cooler maintains temperatures between 35°F and 38°F.
• R290 refrigerant: The heavy-duty compressor uses environmentally friendly R290 refrigerant, as described in the specification sheet.
• Service access: The compressor assembly slides out for easier maintenance access.
• Door details: Recessed handles, magnetic door gaskets, and standard door locks are specified. The doors are swing style.
• Interior lighting and mobility: Interior lights and pre-installed casters are standard features.

Specifications

• Brand: Atosa
• Model: SBB69GRAUS1
• Equipment type: Shallow-depth back bar cooler
• Door configuration: 2 doors
• Capacity: 18.6 cu. ft.
• Number of shelves: 4
• Shelf material/coating: Epoxy-coated
• Exterior and interior: Stainless steel
• Exterior dimensions: 68 × 24 1/2 × 40 1/8 inches (width × depth × height)
• Electrical: 115V / 60 Hz / 1 phase
• Amperage: 2.3 A
• Wattage: 265 W
• Plug: NEMA 5-15P
• Receptacle rating listed on the specification sheet: NEMA 15A/125V
• Compressor horsepower: 1/7 HP
• Refrigerant: R290
• Temperature range stated by Atosa: 35°F–38°F
• Casters: Pre-installed, 2-inch
• Net weight: 225 lb.
• Gross weight: 276 lb.

Installation & Requirements

The specification sheet lists the electrical supply as 115V, 60 Hz, single phase, and identifies a NEMA 5-15P plug and NEMA 15A/125V connection. Confirm the electrical connection against the information on the unit and the site’s available outlet before setup. The sheet also advises leaving the unit room to breathe. It does not state a specific clearance measurement, so no minimum clearance is provided here.

The cooler is supplied with pre-installed casters. Its stated overall dimensions are 68 inches wide by 24 1/2 inches deep by 40 1/8 inches high; use these measurements when checking the intended placement area. The source material does not provide a gas connection requirement.

Operation

Atosa recommends setting the refrigerator between 35°F and 38°F for the best results in food preservation. The SBB69GRAUS1 has an electronic temperature controller, and the specification sheet states that the unit maintains temperatures in this range. The supplied information does not explain controller button functions or provide a step-by-step temperature-setting procedure.

For routine access, the two swing doors have recessed handles and magnetic gaskets. Standard door locks are included. The interior lights illuminate the cabinet, and the four epoxy-coated shelves provide the stated storage arrangement. Additional shelves are available as optional accessories; they are not listed as part of the standard four-shelf configuration.

Cleaning & Maintenance

Atosa advises cleaning the condenser frequently to give the unit more fresh air. The source does not set a specific cleaning interval or provide a detailed condenser-cleaning procedure. The stainless steel interior and exterior are identified as the cabinet materials, and the compressor assembly slides out for easier maintenance access. Follow the equipment’s current manufacturer instructions for any service or cleaning procedure not described in the supplied specification sheet.

Applications

The SBB69GRAUS1 is suited to bar service areas, restaurants, and other commercial foodservice settings that need refrigerated storage close to the point of use. Its two-door layout and 18.6 cu. ft. capacity can support organized storage of chilled beverages or other suitable refrigerated items. The 68-inch width gives operators a clear footprint to plan around, while the 24 1/2-inch depth makes the model relevant where back bar space is limited. Check the stated dimensions, electrical connection, and temperature range against the needs of the intended location and stored products before selecting the cooler.

For this model, the specification sheet lists optional extra shelves with four shelf clips per shelf. The SBB69GRAUS1 top-left shelf part number is W040238101; the top-right and bottom shelf part number is W040238001. These are optional accessories rather than additional standard equipment.