SDA203608

Overview

The Atosa SDA203608 is a heavy-duty welded aluminum dunnage rack built for commercial dry storage. Measuring 36 inches wide by 20 inches deep by 8 inches high, it lifts food cases, cans, and bulk goods off the floor in walk-in coolers, dry storage rooms, and stockrooms. Atosa lists it in the Racks category under its Mixrite line of stainless and fabrication products, alongside related sizes such as the SDA202408, SDA204808, SDA206008, SDA203612, and SDA206012.

Dunnage racks like this one are a standard requirement in foodservice storage: keeping product elevated off the floor protects it from moisture, simplifies cleaning underneath, and helps operations meet food storage practices. The low 8-inch height makes it easy to slide heavy cases onto the rack without lifting them far, which is why this format is common under shelving and along walk-in walls.

Key Features

• Heavy-duty welded construction — the frame is welded, not bolted, so the rack stays rigid under load and has no fasteners to loosen over time.
• 1.2mm aluminum tubing, 1-1/2" x 1-1/2" — square aluminum tubing forms the frame, providing strength while keeping the rack light enough to reposition when cleaning or reorganizing storage.
• 1800 lb weight capacity — rated to hold up to 1800 pounds, enough for stacked #10 cans, food cases, or bulk dry goods.
• NSF certified — certified to NSF standards for use in commercial food storage environments.
• 20-inch depth, 8-inch height — the standard dunnage footprint fits under existing shelving and against walls in walk-ins and dry storage areas.
• Ships 6 per skid — efficient packaging for outfitting a full storage room or walk-in with multiple racks.

Specifications

• Model: SDA203608
• Product type: Aluminum dunnage rack
• Exterior dimensions (W x D x H): 36 x 20 x 8 inches
• Construction: Heavy-duty welded dunnage rack
• Material: 1.2mm aluminum tubing, 1-1/2" x 1-1/2" square profile
• Weight capacity: 1800 lb
• Certification: NSF certified
• Shipping configuration: Ships 6 per skid
• Category: Racks (Mixrite line)

Applications

The SDA203608 is used anywhere commercial food product needs to be stored off the floor. Typical placements include:

• Walk-in coolers and freezers — aluminum construction stands up to cold, humid storage environments, and the 8-inch height keeps cases above floor-level condensation.
• Dry storage rooms — stacks of canned goods, food cases, and bulk ingredients stay organized and accessible while meeting storage-off-the-floor practice.
• Under existing shelving — the low profile fits beneath standard shelving runs to add storage capacity without a second full-height rack.
• Stockrooms and receiving areas — a convenient landing point for deliveries before product is put away.

With a 36-inch width, this model suits storage runs where space is tighter than a 48-inch or 60-inch rack allows. Atosa's dunnage rack family covers other widths and heights in the same welded aluminum format: the SDA202408 (24 x 20 x 8), SDA204808 (48 x 20 x 8), SDA206008 (60 x 20 x 8), SDA203612 (36 x 20 x 12), and SDA206012 (60 x 20 x 12). The 12-inch-high versions offer more clearance under the load, and the 60-inch and longer models in the family come with 6 legs for additional support.

Why Welded Aluminum

Welded construction matters in a dunnage rack because the joints carry the full load. A welded frame has no bolts or brackets to work loose under repeated loading and unloading, so the rack keeps its rated capacity over years of use. Aluminum keeps the unit light for its strength — a practical benefit when staff need to move racks to hose down a walk-in floor or reconfigure a storage room — and it will not rust the way bare steel can in a damp cooler environment. The 1-1/2 inch square tubing profile gives the frame its stiffness while the 1.2mm tubing wall keeps the overall weight down.

Choosing the Right Size