ST3636EC

Overview

The Atosa ST3636EC is a 36″ × 36″ work table in the Flat Top Shelf Style of Atosa's 36 Inch Series, part of the MixRite stainless fabrication line that also covers sinks, shelves, racks, and equipment stands. Atosa — whose tagline is “We Make The Kitchen Better!” — builds this table from 18-gauge 430 stainless steel throughout, including the undershelf and the four stainless steel tubular legs. The overall footprint is 36″ wide by 36″ deep with a 34″ height, and the table weighs 51.58 lb net (57.09 lb gross packed).

Where the ST3636EC differs from a basic open-leg table is the undershelf: it is standard equipment, adjusts to your desired height, and is rated to carry 340 lb, while the top itself is rated at 460 lb. The top is mechanically polished to a satin finish, sound deadened, and has all edges turned down as a safety feature. A stainless steel hat channel reinforces the top, and adjustable bullet feet let you level the table on uneven floors. The table ships KD (knocked down) and is listed by Atosa as easy to assemble.

Atosa's spec sheet for this series also lists a 90-day warranty on workmanship. Other sizes in the same Flat Top Shelf Style series include the ST3648EC (48″ long), ST3660EC (60″), ST3672EC (72″), and ST3684EC (84″), all 36″ deep and 34″ high.

Key Features

• 18-gauge 430 stainless steel construction — the top, undershelf, and legs are all 430 stainless steel, not just the work surface.
• Flat top with adjustable undershelf — the undershelf can be adjusted to the desired height and is standard on all models in the series.
• 460 lb top capacity / 340 lb undershelf capacity — published load ratings for the ST3636EC.
• Sound-deadened top — reduces drumming and noise on the work surface.
• Satin finish — the entire top is mechanically polished to a satin finish.
• Turned-down edges — all edges are turned down as a safety feature.
• Stainless steel hat channel — reinforces the top structure.
• Adjustable bullet feet — level the table on uneven floors.
• Ships KD, easy to assemble — knocked-down packaging with straightforward setup.
• Optional caster kit — Atosa's Work Table Caster Set, 5″ H with 1-1/2″ expanding stems (set of 4), part # WA400001.

Specifications

• Model: ST3636EC
• Series: 36 Inch Series — Flat Top Shelf Style work tables
• Brand line: MixRite (Atosa)
• Type: Work Table
• Material: 430 stainless steel (top, undershelf, and legs)
• Gauge: 18
• Legs: 4, stainless steel tubular
• Exterior dimensions (W×D×H): 36″ × 36″ × 34″
• Undershelf dimensions: 36″ × 36″
• Top shelf capacity: 460 lbs
• Under shelf capacity: 340 lbs
• Net weight: 51.58 lb
• Gross weight: 57.09 lb
• Finish: mechanically polished satin
• Feet: adjustable bullet feet
• Shipping: Ships KD (knocked down)
• Optional accessory: Work Table Caster Set, 5″ H, 1-1/2″ expanding stem caster kit (set of 4), part # WA400001
• Warranty (workmanship): 90 days, per Atosa's published spec sheet
• Manufacturer contact: Atosa USA — toll free (855) 855-0399, [email protected], Mon–Fri 8:30am–5:00pm (closed Sat–Sun)

Note: Atosa states that it is continuously improving its products and that specifications are subject to change without notice.

Installation & Requirements

The ST3636EC ships KD — knocked down — and Atosa lists easy assembly as a standard feature of the series. Setup involves attaching the four stainless steel tubular legs to the top, which is reinforced with a stainless steel hat channel. Once the table is standing, the adjustable bullet feet screw in or out to level the unit on uneven floors, and the undershelf can be set at your desired height.

If you need to move the table for cleaning or layout changes, Atosa offers an optional caster set (part # WA400001): four 5″ H casters with 1-1/2″ expanding stems that suit the table's tubular legs.

The published spec sheet lists no electrical, gas, or plumbing connections for this model — it is an unpowered stainless steel table, so placement only requires floor space matching its 36″ × 36″ footprint.

Applications

With a square 36″ × 36″ footprint, the ST3636EC fits kitchens that need a full prep surface in a compact block rather than a long table run — think prep and plating stations, pastry and baking work, assembly points, or a landing zone beside a dish area or cook line. The 34″ height puts the work surface at a comfortable standing level, and the 460 lb top rating means the surface can double as a base for countertop equipment or bulk product during service.

The adjustable undershelf adds a 340 lb-rated storage tier underneath the work surface, useful for dry goods, smallwares, or backup stock in back-of-house spaces. Because the table is part of Atosa's MixRite line — which also includes sinks, shelves, racks, and equipment stands — it can be mixed with matching stainless fabrication when outfitting a larger kitchen. Operators running longer runs can step up through the same series in 48″, 60″, 72″, or 84″ lengths.