700XP

Overview

Electrolux Professional 700XP is a modular cooking range line for commercial kitchens. It is a family of cooking equipment rather than one appliance with a single set of specifications. The supplied product information includes an electric hob cooking top, a four-hot-square-plate electric range with an oven, and a two-well freestanding electric fryer. Their dimensions, power requirements and functions differ, so specifications below are identified by configuration and should not be treated as universal 700XP figures.

The 700XP electric hob cooking top is a half-module unit with a large, flat mild-steel cooking surface. Its 400 mm width and broad plate allow different-sized pots and pans to sit on the surface and move between cooking areas without lifting. Other listed 700XP equipment includes a range with four square plates and an electric oven, and a freestanding fryer with two wells.

Key Features

• Modular format: The range line includes cooking equipment in different configurations, including hob tops, ranges and fryers.
• Electric hob surface: The 400 mm 700XP hob cooking top uses infrared heating elements and has a durable mild-steel cooking plate.
• Flexible pan placement: The hob’s flat surface has no intermediate sections, allowing various pan sizes to be used and repositioned across the plate.
• Stainless-steel construction: The hob’s exterior panels are stainless steel with a Scotch Brite finish. Its one-piece pressed worktop is 1.5 mm thick stainless steel.
• Modular joins: Right-angled side edges allow flush-fitting junctions between units, helping eliminate gaps between adjoining tops.
• Service access: The hob’s major compartments are located at the front of the unit for maintenance access.
• Water protection: The electric hob cooking top is listed with an IPX4 protection index.

Specifications

Specifications below belong to the named 700XP configurations. Electrical supply and dimensions must be checked against the exact unit being considered.

700XP electric hob cooking top, 400 mm

• Width: 400 mm
• Depth: 730 mm
• Height: 250 mm
• Net weight: 47 kg
• Heating elements: 5.3 kW infrared elements; the specification lists total watts as 5 kW
• Maximum cooking plate temperature: 400 °C
• Cooking surface: mild steel
• Worktop: one-piece pressed stainless steel, 1.5 mm thick
• Exterior finish: stainless steel with Scotch Brite finish
• Electrical supply: 380–400 V, 3N phase, 50/60 Hz
• Predisposed supply: 380–400 V 3N, 50/60 Hz, 4.5–5 kW
• Rated amps: 0 A, as listed in the specification
• Water protection: IPX4
• Shipping weight: 42 kg
• Shipping dimensions: 460 mm wide, 820 mm deep and 530 mm high
• Certification group: N7ETE

700XP four-hot-square-plate electric range with electric oven

• Listed electrical supply: 400 V, 3-phase, 50/60 Hz
• Width: 800 mm
• Height: 850 mm
• Oven working temperature: 100 °C minimum to 300 °C maximum
• Oven cavity width: 540 mm

700XP two-well freestanding electric fryer, 7-litre listing

• Electrical supply: 230 V, 3-phase, 50/60 Hz
• Total power: 10.8 kW
• Well capacity: 5.5 L minimum to 7 L maximum
• Thermostat range: 105 °C minimum to 185 °C maximum
• Usable well dimensions listed: 240 mm, 235 mm and 380 mm
• Net weight: 69 kg

Installation & Requirements

Electrical requirements vary by configuration. The 400 mm electric hob cooking top is specified for a 380–400 V, 3N-phase, 50/60 Hz supply; its listed predisposition is 380–400 V 3N, 50/60 Hz, 4.5–5 kW. The listed four-plate range with oven is specified at 400 V, 3-phase, 50/60 Hz. The two-well fryer listing specifies 230 V, 3-phase, 50/60 Hz. These figures describe separate products and are not interchangeable.

For the electric hob cooking top, the manufacturer’s specification calls for an approximately 150 mm safety gap or heat insulation if the appliance is installed next to temperature-sensitive furniture or a similar surface. The hob top is suitable for countertop installation and is specified for an ambient base only; the source says it cannot be installed on a refrigerated or freezer base.

The hob top offers right-angled side edges for flush-fitting joints between units. The manufacturer lists junction sealing kits and bridge-installation supports as optional accessories for the unit. Confirm the exact appliance configuration and its installation documentation before planning a modular layout.

Operation

The electric hob uses infrared heating elements to heat its mild-steel cooking surface, which can reach a maximum temperature of 400 °C. The uninterrupted flat plate accommodates different pan sizes and lets staff move pots and pans across the surface without lifting them. This layout is suited to kitchens that need to reposition cookware between cooking areas during service.

Other 700XP configurations serve different tasks: the listed four-plate range combines a cooking top with an electric oven, while the listed fryer has two wells and a thermostat range of 105 °C to 185 °C. These functions and temperature figures belong only to those respective configurations.

Cleaning & Maintenance

The 700XP electric hob specification describes its mild-steel cooking plate as easy to clean. Stainless-steel exterior panels and the one-piece pressed worktop are specified for this hob. Major compartments are located at the front for ease of maintenance. The supplied product information does not give a model-specific cleaning procedure or maintenance interval for the listed 700XP configurations.

Applications

The 700XP line can be configured for different commercial cooking duties. A flat electric hob top supports cooking with multiple pan sizes on one continuous surface. A four-hot-plate range with an oven combines top cooking and oven cooking in one listed configuration. A two-well freestanding fryer provides a separate option for fryer service. Select a configuration by the cooking tasks required and verify its individual dimensions and electrical supply.