LXeR-30
DishwasherHobart LXeR-30 Undercounter Dishwasher
The Hobart LXeR-30 is a low-amp Advansys undercounter dishwasher with high-temperature sanitizing, Energy Recovery and three selectable wash cycles. It measures 23-15/16 inches wide and is listed with throughput of 30, 24 and 13 racks per hour.
- Voltage
- 120/208V
- Phase
- 1
- Amps
- 30 amp
Hobart LXeR-30
197 compatible parts available
Genuine OEM Parts
Sourced from the manufacturer
Canadian Owned
Based in British Columbia
Canada-Wide Shipping
Every province and territory
24hr Quote Response
Answered by a real technician
Manuals & Documents
About the Hobart LXeR-30
Overview
The Hobart LXeR-30 is a low-amp Advansys commercial dishwasher in an undercounter format. Its listed dimensions are 23-15/16 inches wide by 26-13/16 inches deep by 32-1/2 inches high. The model uses high-temperature sanitizing and a fresh-water rinse. The LXe series parts manual identifies this model as ML-130361.
The source description lists rack-throughput figures of 30, 24 and 13 racks per hour, without mapping the individual figures to specific cycles. The model is also listed with a 3/4 HP washing pump and water use of 0.62 gallon per rack.
Key Features
- Three selectable cycles: Light, normal and heavy; the Pot & Pan cycle is included on the heavy setting.
- High-temperature sanitizing: The unit is described as a hot-water sanitizing dishwasher.
- Energy Recovery: Energy Recovery is listed as a feature of the LXeR-30.
- Fresh-water rinse: The dishwasher uses a fresh-water rinse, with listed water consumption of .62 gal/rack.
- Automated deliming: An automated delime cycle is included.
- Service information: The listed features include a clogged wash arm alert and advanced service diagnostics.
- Chemical pumps: Detergent, rinse aid and delimer pumps are specified.
Specifications
- Brand: Hobart
- Model: LXeR-30
- Equipment type: Low-amp Advansys undercounter dishwasher
- Model identifier in the LXe series parts manual: ML-130361
- Dimensions: 23-15/16 inches wide by 26-13/16 inches deep by 32-1/2 inches high
- Sanitizing: High-temperature, hot-water sanitizing
- Rinse: Fresh-water rinse
- Water use: .62 gal/rack
- Rack throughput: 30, 24 and 13 racks per hour, as listed; the source does not identify which figure corresponds to each cycle
- Wash pump: 3/4 HP
- Cycles: Light, normal and heavy; Pot & Pan washing is on the heavy cycle
- Electrical: 120/208V, three-wire, 60 Hz, single phase; the product listing identifies a 30-amp breaker
- Specified power-cord kit for LXeR-30: Hobart part 00-562476, listed for 120/208-240V, 60 Hz, single phase
- Included systems and alerts: Energy Recovery, automated delime cycle, clogged wash arm alert, advanced service diagnostics, detergent pump, rinse aid pump and delimer pump
- Listings and marks: cULus, NSF and ENERGY STAR
Installation & Requirements
The listed electrical supply is 120/208V, three-wire, 60 Hz, single phase, and the product listing specifies a 30-amp breaker. The parts manual separately lists power-cord kit 00-562476 for the LXeR-30 and LXeSR-30, described as 120/208-240V, 60 Hz, single phase. Confirm the unit’s exact electrical configuration against its rating information before connecting it.
The product listing states that factory startup is free for installations within a 50-mile radius of a Hobart service office. For installations beyond that radius, startup is charged at the rate quoted by the local Hobart service office. The available information does not provide clearance, gas-connection or ventilation requirements for this model.
Operation
Select one of the light, normal or heavy cycles to suit the wash load. Pot and Pan washing is provided on the heavy cycle. The LXeR-30’s listed applications include glasses, dishes and pots and pans. Its wash process is specified as high-temperature sanitizing followed by a fresh-water rinse. The listed water-use figure is .62 gal/rack; the source does not assign the listed rack-throughput figures to particular cycle selections.
Cleaning & Maintenance
The supplied model information identifies an automated delime cycle as a cleaning-related feature. It does not provide a deliming procedure, cleaning steps, chemical instructions or a maintenance schedule, so those details should be taken from the unit’s operating documentation rather than assumed from this product information.
Troubleshooting
A clogged wash arm alert and advanced service diagnostics are listed features. The available information does not provide fault codes, repair procedures or a list of common failures. Use the unit’s service documentation or qualified service support to interpret alerts and diagnose a problem.
Applications
The LXeR-30 is listed for washing glasses, dishes, pots and pans. Its undercounter dimensions make the model relevant to commercial kitchens considering an undercounter dishwashing unit; check the stated dimensions and electrical requirements against the intended location and supply.
Hobart LXeR-30 Specifications
- Length
- 26.8125"
- Width
- 23.9375"
- Height
- 32.5"
- Voltage
- 120/208V
- Phase
- 1
- Amps
- 30 amp
- Type
- Undercounter dishwasher
- Brand
- Hobart
- Model
- LXeR-30
- Breaker
- 30 amp
- Frequency
- 60 Hz
- Dimensions
- 23-15/16”W x 26-13/16”D x 32-1/2”H
- Electrical
- 120/208 (3W)/60/1
- Rinse type
- Fresh water rinse
- Sanitizing
- High temperature
- Delime cycle
- Automated
- Delimer pump
- Included
- Certifications
- cULus, NSF, ENERGY STAR®
- Detergent pump
- Included
- Rinse aid pump
- Included
- Wash arm alert
- Clogged wash arm alert
- Energy recovery
- Energy Recovery™
- Factory startup
- Free within a 50 mile radius of a Hobart service office; beyond 50 miles, charged at the quoted rate by the local Hobart service office
- Pot and pan cycle
- On heavy cycle
- Selectable cycles
- 3: light, normal, heavy
- Service diagnostics
- Advanced
Frequently Asked Questions
What are the specifications of the Hobart LXeR-30?+
What does the '30' in the LXeR-30 model name mean?+
What cycles does the LXeR-30 offer?+
How much water does the LXeR-30 use?+
What electrical supply does the LXeR-30 require?+
What cleaning or service features are listed?+
What is the average lifespan of a Hobart commercial dishwasher?+
How much does the Hobart LXeR-30 cost?+
Need Parts for This Model?
Get a free quote for parts, service, or maintenance for the Hobart LXeR-30. We respond within 24 hours.
View all Hobart equipment →
Parts for the Hobart LXeR-30
Browse genuine OEM components, gaskets, heating elements, thermostats, and replacement hardware guaranteed to fit this equipment.
In Stock 360°Hobart 00-941757 Rivnut, Hex, Flanged, 5/16-18
In Stock 360°Hobart SD-008-25 Screw, Phillips Pan Head, 10-16 x 1/2"
In Stock 360°Hobart 00-941592 Speed Sensor
In Stock 360°Hobart 00-942101-00002 Capacitor, 420/470 Volt, 50/60HZ, 30uF
In Stock 360°Hobart 00-941726-00009 Hose, EPDM, 3/8" x 22" Long
Available to OrderHobart 00-941792-00002 PANEL-SIDE, LH
In Stock 360°Hobart FP-087-46 Fitting, 1/4" Tube, Used with Rinse Aid Option
In Stock 360°Hobart 00-941890 Bracket, Reed Switch
In Stock 360°Hobart 00-942096-00001 Rinse Pump/Motor, 120V
In Stock 360°Hobart 00-941582 Shaft, Rinse, Before S# 231174971
In Stock 360°Hobart 00-949316 Pivot/Shoulder Screw, Door, Torx Drive
Available to OrderHobart 00-438131-00192 LABEL, INSTRUCTION, CLEANING
In Stock 360°Hobart 00-292856-00002 Drain Hose, 5/8"
In Stock 360°Hobart 00-941638-00004 Chemical Pump, Green, Delime, LXE
In Stock 360°Hobart 00-948486 Sealing Ring, Wash Arm
In Stock 360°Hobart 00-558090 Hose Clamp, Spring Band
In Stock 360°Hobart 00-974108-00002 Conversion Kit, Anko to Welco
In Stock 360°Hobart 00-975024 Suction Strainer, Chemical Pump
In Stock 360°Hobart 00-749400 Bracket, Overtemp Mounting
In Stock 360°Hobart 00-975019 Bearing Cover Kit, LXE
In Stock 360°Hobart 00-941726-00007 Hose, 3/8" x 15", EPDM
In Stock 360°Hobart FE-022-28 Fuse, 250V, 0.5A
Available to OrderHobart 00-941792-00001 PANEL-SIDE,RH
Available to Order 360°

