LXiPRGC

Overview

The Hobart LXiPRGC is the cold-water undercounter dishwasher in Hobart's LX Series, carrying catalog number ML-130179 and listed as COLD for its water connection. It is a product of Hobart Corporation, 701 S. Ridge Avenue, Troy, Ohio 45374-0001, and it appears in a 2012 commercial dishwashers qualifying product list as an Undercounter machine in the Low category, recorded with the values 0.38 and 1.180 and an entry date of 12/14/2011.

Service documentation for this model runs deep. Hobart's LX Series replacement-parts catalog, Form 33959 Rev. E (March 2014) covers the LXiPRGC alongside the family it was sold with: ML-130016 LXiC COLD, ML-130017 LXiH HOT, ML-130018 LXiGC COLD, ML-130019 LXiGH HOT and ML-130178 LXiPRC COLD, plus the earlier LX18, LX30, LX40 and LXG machines (ML-104349 through ML-110381). That catalog is the reason nearly every wearable component on this machine, from the chemical pump to the drain hose spring, is identified by an exact Hobart part number.

Key Features

• Undercounter format: the qualifying product list classifies the LXiPRGC as an undercounter — the configuration that tucks beneath a prep counter or bar, keeping floor space in a compact kitchen or service area working for you.
• Low category listing: the 2012 list places the model in the Low category for undercounters, with recorded values of 0.38 and 1.180 (entry dated 12/14/2011).
• Cold water connection: Hobart's parts catalog identifies the machine as LXiPRGC COLD (ML-130179), distinguishing it from the HOT-water versions in the same family.
• Chemical pump assembly: genuine Hobart part 00-329871, a chemical pump assembly, is listed as fitting the LXiPRGC (it also fits the SR24C and SR24H) — the dosing hardware documented for this machine.
• Water pressure regulator: the 1/2-inch Hobart water pressure regulator 00-974829 is listed for the LXiPRGC, alongside the PW10, PW20, PWV, SR24C, SR24H and UW50.
• Limit temperature control: part 00-328980-00001 is listed for LXiPRGC-COLD machines produced from March 2014 onward (201403-).
• Documented serviceability: Form 33959 identifies pump & motor assemblies in four voltage/frequency builds, shaft seal and impeller kits for both Ingersoll and Crane pump builds, drain hardware and the machine's electrical group.

Specifications

• Manufacturer: Hobart Corporation, 701 S. Ridge Avenue, Troy, Ohio 45374-0001
• Product type: commercial dishwasher, undercounter
• Model: LXiPRGC
• Catalog (ML) number: ML-130179
• Water connection: COLD
• 2012 qualifying product list entry: Undercounter · Low category · 0.38 · 1.180 · dated 12/14/2011
• Parts documentation: LX Series catalog, Form 33959 Rev. E (March 2014); the manual library hosts the parts list at 56 pages
• Serial number note: some pump-group parts apply from serial number 23-1085-462 onward

Replacement Parts & Compatibility

The parts below are the ones the sources tie to this machine — three components listed specifically for the LXiPRGC by part number, followed by the groups Hobart documents for the LX Series family in Form 33959 Rev. E. Match your ML number, water version and serial number before ordering.

Listed specifically for the LXiPRGC

• 00-329871 — chemical pump assembly, genuine OEM (also listed for SR24C and SR24H)
• 00-328980-00001 — limit temperature control, listed for LXiPRGC-COLD (201403-); the same part covers LXiGC-COLD (201403-) and LX18-COLD
• 00-974829 — water pressure regulator, 1/2 inch (also listed for PW10, PW20, PWV, SR24C, SR24H and UW50)

Pump & motor group

• 00-474837-00001 — pump & motor assembly, 115/230 V, 60 Hz (includes all pump & motor parts)
• 00-474837-00002 — pump & motor assembly, 115/230 V, 50 Hz
• 00-749564-00001 — pump & motor assembly, 380-400/480 V, 60 Hz, 3-phase
• 00-749564-00002 — pump & motor assembly, 380-450 V, 50 Hz, 3-phase
• 00-476734-00010 — pump motor kit, 60 Hz, 3-phase
• Shaft seal kits: 00-329240-00004 (Ingersoll) and 00-476734-00004 (Crane), each including seal, O-ring, casing O-ring and shims
• Impeller kits: 00-329240-00005 and 00-329240-00009 (LX, 60 Hz / 50 Hz, Ingersoll — impeller, casing O-ring, hardware); 00-476734-00005 and 00-476734-00008 (60 Hz / LX 50 Hz, Crane — impeller, casing O-ring, screws); 00-476734-00011 and 00-476734-00012 (60 Hz / 50 Hz, 3-phase)
• Plug kits: 00-329240-00006 (Ingersoll — Ryton plug & O-ring); 00-476734-00006 (Crane — pipe plug & O-ring)
• Shim kits: 00-329240-00007 (Ingersoll — 0.002, 0.015 and 0.025); 00-476734-00007 (Crane — 0.005, 0.015 and 0.030)
• 00-476734-00009 — motor shaft flinger kit (Crane)

The catalog marks some pump-group parts as applying from serial number 23-1085-462 onward.

Drain group

• 00-292856-00002 — drain hose (LX Series); 00-292856-00003 — drain hose
• 00-476664-00001 — drain hose spring
• 00-528499 and 00-538412 — hose clamps
• Drain water tempering group: FP-041-50 pipe, 3/4 x 1-3/8 TBE (brass); FP-090-89 Y-fitting, 3/4 x 3/4 x 3/4

Electrical group

• FE-023-78 — fuse, 1.25 amp (listed for 460-480 V machines, LX & LXG Series; also listed at 1.25 amp, 500 V)
• FE-022-74 — fuse, 0.6 amp, 500 V
• 00-087714-046-1 — relay, 2-pole, 30 amp, 3-phase, with Mylar barrier 00-749657 and relay mounting bracket 00-749610
• 00-087713-040-2 — contactor, 30 amp, 3-pole, 3-phase, with contactor-mounting bracket 00-749468
• Transformers: 00-294500-027-3 (150 VA, 240 V, 50/60 Hz, 3-phase); 00-294500-027-4 (150 VA, 208 V, 50/60 Hz, 3-phase); 00-294500-046-1 (208-240/480 V, 60 Hz — LXi & LXiG Series); 00-294500-00051 (30 VA, 50/60 Hz)
• 00-918385 — terminal block, 5-pole (current construction), with bracket 00-918339; previous-construction connector 00-475299-00001 with bracket 00-473138
• 00-473195 — bracket & fuse assembly (LX & LXG Series); 00-473196 — fuse bracket; 00-749584 — fuse & transformer cover (3-phase)

The catalog also tags certain electrical parts to specific variants — for example transformer 00-294500-027-6 (480 V, 3-phase) for the LXH & LXGH Series, transformer 00-294500-027-8 (400 V, 3-phase) for the LXH, LXGH, LXiH and LXiGH, and fuse block 00-294436-00002 (3-phase) for the LXiH. Those tags matter: order against the ML number stamped on your own machine.

Fitment & trim

• 00-359600 — base extension, 6 inch, packaged
• 00-329286 — top cover trim assembly kit (LX Series)
• Hardware called out in the catalog: cap screw SC-041-86 (1/4-20 x 3/8 hex head), machine screws SC-018-24 (6-32 x 3/4 phil. pan hd), SC-066-05 (10-24 x 3/8 phil. truss hd, SST) and SC-080-12 (10-24 x 5/8 phil. fil. hd, SST), lockwashers WL-006-17, WL-006-07 and WL-014-07 (SST), stop nuts NS-031-50, NS-031-15 and NS-031-16 (SST), and washer WS-017-06 (SST)

Applications

Undercounter dishwashers earn their keep where rack volume doesn't justify a door-type or conveyor machine but the warewashing still has to keep pace with service: bar wells and cocktail stations, coffee shops and cafés, delis and bakeries, small restaurants, staff cafeterias, care homes and community halls. In those settings the machine works under the counter at the point of use, and the chemical pump assembly (00-329871) and 1/2-inch water pressure regulator (00-974829) documented for the LXiPRGC are the components behind dosing and rinse pressure through a shift. Where the counter line sits higher than the machine's standard height, the catalog-listed 6-inch base extension (00-359600) is the documented option for raising the body.

PartHubz supplies the LXiPRGC and the replacement parts documented above; every component is listed by its exact Hobart part number so you can match what is on your machine before you order.