MSF17GR234000

Overview

The Atosa MSF17GR234000 is the night cover for the MSF17GR sandwich prep table, published by Atosa USA under Sandwich Prep Table Accessories within its Refrigerated Prep Tables group. Atosa's own spec sheet titles it 'Night Cover for MSF17GR,' and retail listings describe it as a night cover made specifically for the Atosa USA MSF17GR refrigerated prep table. If you run an MSF17GR - the slim sandwich prep table in Atosa's MSF series (Atosa's catalog lists the MSF17GR-NTCV slim sandwich prep table alongside this accessory) - this is the cover assigned to that unit.

A night cover does a specific job on a prep line: when the shift ends, staff set it over the pan rail so the rail, food pans and cutting-board area sit protected overnight and during any closed hours. Between services, it keeps airborne debris off open pans and shields the rail area from splashes and stray items in a busy kitchen. Atosa documents the piece properly, too - the night-cover spec sheet includes plan and side-view drawings showing the cover's footprint relative to the pan rail, so fitment can be checked before it ever reaches the kitchen.

The MSF17GR234000 belongs to a full family of Atosa night covers. Atosa's chart assigns a dedicated cover to each table in the MSF sandwich prep line - MSF8301GR, MSF3610GR, MSF8302GR, MSF8303GR (with separate left- and right-opening covers), MSF8304GR (also left and right), MSF8305GR, MSF3615GR, MSF8306GR/MSF8308 and MSF8307/MSF8308 - each with its own part number and dimensions. The MSF17GR234000 is the cover matched to the MSF17GR, and its dimensions are specific to that table.

Behind the part is Atosa USA, Inc., whose tagline is 'We Make The Kitchen Better!' The company publishes refrigeration lines running from back bar equipment, blast chillers and chef bases through reach-ins, undercounters and worktops, walk-in coolers and refrigerated prep tables, alongside the CookRite cooking line and the MixRite stainless line. Atosa's press releases also note that Atosa USA was named Equipment Vendor of the Year by International Dairy Queen. Support is reachable toll free at (855) 855-0399 or by email at [email protected], Monday to Friday, 8:30 am to 5:00 pm (closed Saturday and Sunday), with locations listed in California, Colorado, Florida, Georgia, Illinois, New Jersey, Ohio, Texas and Washington.

Key Features

• Model-specific fit: the compatible model is the Atosa MSF17GR - Atosa's chart lists it as 'Night Cover for MSF17GR,' and listings describe it as custom-fit rather than a universal cover.
• Low-profile dimensions: 30 3/8 in W x 15 3/4 in D x 2 1/4 in H, sized to the MSF17GR pan rail.
• Weight: 31 lb shipping weight.
• Commercial build: listed as a durable stainless steel accessory built for commercial kitchen environments.
• Documented fitment: plan and side-view drawings on Atosa's night-cover spec sheet show how the cover sits over the pan rail.
• Series coverage: part of Atosa's night-cover program for the MSF sandwich prep line, with a dedicated part number per table.

Specifications

• Part Number / SKU: MSF17GR234000
• Product Type: Night cover (Part & Accessory Type: night cover)
• Category: Sandwich Prep Table Accessories - Atosa Refrigerated Prep Tables
• Compatible Model: Atosa MSF17GR sandwich prep table
• Exterior Dimensions: 30 3/8 in W x 15 3/4 in D x 2 1/4 in H
• Weight: 31 lb
• Material (as listed): stainless steel accessory, built for commercial kitchen environments
• Manufacturer: Atosa USA, Inc. - www.atosa.com | www.atosausa.com
• Manufacturer Support: Toll free (855) 855-0399 - [email protected] - Mon-Fri 8:30 am-5:00 pm, Sat-Sun closed
• Manufacturer's Note: 'Atosa is continuously improving products. Specifications are subject to change without notice.'

Installation & Requirements

This is a fitment accessory, not an appliance: nothing in Atosa's documentation for it involves electrical, gas, water or drainage connections. It simply sits over the pan rail, and the prep table underneath runs exactly as before. Listings describe installation as easy, and the cover is custom-fit to the MSF17GR rather than a one-size piece - Atosa's plan and side-view drawings on the night-cover spec sheet show the 30 3/8 in x 15 3/4 in footprint relative to the rail.

Because Atosa assigns one cover per table in its chart, ordering by table model is the reliable route: MSF17GR tables take the MSF17GR234000, while the other MSF-series tables each have their own part number. If a cover is already on hand and you want to confirm it suits an MSF17GR, compare its exterior dimensions against 30 3/8 in W x 15 3/4 in D x 2 1/4 in H before fitting. At 31 lb, it is a manageable piece to move between storage and the line at open and close.

Operation

In day-to-day service the routine is simple: at close, staff set the cover over the pan rail; at open, it comes off and prep resumes. Kitchens typically leave the food pans seated in the rail under the cover overnight so the line is ready to restock and start again the next morning. Between services - during a mid-afternoon lull or a closed day - the cover keeps the rail area shielded from dust, splashes and stray items that land in a working kitchen.

One operational note comes from Atosa itself: the manufacturer states that it is continuously improving products and that specifications are subject to change without notice, so it is worth confirming dimensions against the current spec sheet when ordering additional covers for a multi-unit line.

Applications

The MSF17GR234000 serves any operation running the Atosa MSF17GR slim sandwich prep table: sandwich shops and delis building subs and wraps to order, cafes and coffee shops holding cold fillings and toppings in the rail, salad and grab-and-go stations, convenience and campus foodservice with made-to-order cold lines, and catering or ghost-kitchen prep areas that stage cold ingredients in pans. Wherever the table closes down overnight, this is the piece that goes over the rail before the lights go out - and comes off first thing the next morning when the line fires up again.