SOD1272

Overview

The Atosa SOD1272 is a 72-inch double overshelf built for Atosa MSF series refrigerated sandwich prep tables. It is the largest of the three sizes Atosa offers in this line — the related SOD1248 (48-inch) and SOD1260 (60-inch) models cover shorter tables — and Atosa catalogs it under its refrigerated prep tables category as a Sandwich Prep Table Accessory.

On the line, the SOD1272 puts two tiers of stainless steel storage above a prep table, a worktable, or a refrigerated base. The manufacturer positions it as a way to maximize vertical space in high-traffic commercial kitchens: the shelves hold spices, small appliances, or prepared dishes within easy reach while the primary prep surface stays clear of clutter. For operators, that means more storage capacity from existing equipment without expanding the kitchen footprint.

Construction is SS430 stainless steel throughout, with 18-gauge shelves carried on stainless steel support pipes. The reinforced design maintains structural integrity under heavy daily use, and Atosa rates the unit at 250 lb. The published spec sheet carries NSF approval along with a 90-day warranty on workmanship.

Key Features

• Two 18-gauge stainless steel shelves — a double-tier format that adds a full second level of storage above the prep surface.
• SS430 stainless steel construction — a sanitary, heat-resistant surface for foodservice use.
• Adjustable lower shelf — the under shelf can be set at the desired height, so the clearance between tiers matches what you store there.
• 250 lb weight capacity — the rated capacity for the unit per Atosa's specifications.
• Sound-deadened shelves — both top and bottom shelves are sound deadened to quiet the unit during busy service.
• Stainless steel support pipe — the frame uprights are stainless steel, matching the shelves.
• Easy to assemble — listed as a standard feature on Atosa's spec sheet.
• NSF approval — the unit meets NSF's standards, which focus on public health protection and construction that promotes food safety.
• MSF series fit — sized for Atosa 48-inch, 60-inch, and 72-inch sandwich prep tables.

Specifications

• Model: SOD1272
• Product type: Double overshelf for MSF series sandwich prep tables
• Exterior dimensions (W x D x H): 72" x 12" x 33"
• Overall length (plan view): 72 5/8" (1846 mm)
• Height (plan view): 33" (838 mm)
• Material: SS430 stainless steel
• Shelf thickness: 18 gauge
• Number of shelves: 2
• Weight capacity: 250 lb
• Net weight: 33.5 lb
• Gross weight: 36.5 lb
• Packing dimensions: 73" x 13 1/2" x 3 7/10"
• Certification: NSF
• Manufacturer warranty (spec sheet): 90 days on workmanship
• Compatible tables: Atosa 48", 60" and 72" sandwich prep tables (MSF series)

Installation & Requirements

The SOD1272 is a passive shelving accessory — it requires no electrical, gas, or water connections. Atosa's spec sheet lists it as easy to assemble, with stainless steel support pipes forming the uprights and the lower shelf adjustable to the desired height.

Fit is the main requirement: the unit is made for Atosa 48-inch, 60-inch, and 72-inch sandwich prep tables in the MSF series. The product description also notes that it can be mounted directly onto a worktable or refrigerated base, so it can sit above prep surfaces beyond the MSF line as well. At 33.5 lb net (36.5 lb gross), handling during setup is straightforward, and the packed unit ships at 73" x 13 1/2" x 3 7/10".

Operation

In daily service, the two tiers work as open storage directly over the prep line. The manufacturer's description points to spices, small appliances, and prepared dishes as typical loads — items line staff need at hand without crossing the kitchen. Because the shelves mount above the table, pans, lids, and garnish rails on the prep surface stay unobstructed.

The adjustable lower shelf lets you set the gap between tiers: lower for flat cartons and pans, higher for squeeze bottles or small appliances. Both shelves are sound deadened, which dampens the rattle and resonance that shelving can produce in a loud kitchen. The 250 lb rating covers the load on the unit as specified by Atosa.

Cleaning & Maintenance

The shelves present a smooth, non-porous stainless surface that is simple to wipe down — the product description highlights this as helping staff adhere to strict health and safety protocols during busy service shifts. SS430 stainless steel is used across the shelves and the stainless steel support pipes, so the whole unit presents the same sanitary, heat-resistant surface. No periodic maintenance tasks beyond routine cleaning are listed in Atosa's published materials for this model.

Applications

The SOD1272 suits any operation running an Atosa MSF series sandwich prep table in the 72-inch class: sandwich shops, delis, salad and quick-service lines, and institutional kitchens that prep wraps, salads, or platters at volume. In high-traffic kitchens — the setting the manufacturer calls out — the double-tier format adds storage over the same floor area, which matters where every foot of counter and floor is already allocated. The 48-inch and 60-inch models in the same series cover shorter MSF tables, so a multi-table prep line can carry matching shelving across its full run.