HL800CE

Overview

PartHubz supplies the replacement parts and accessories documented for this model. The sections below stick to what the catalog and the supplier listings for this mixer actually state.

Key Features

• 80-quart planetary mixing: Supplier listings describe the Legacy HL800/HL1400 units as planetary mixers, and the 80-quart beater (Hobart 00-874654) is listed as fitting the HL800CE — the capacity class the model is named for.
• 3 Hp motor, 200-400 V: Form 43126 assigns motor assembly 00-875995-00002, rated 3 Hp at 200-400 V, to the HL800 builds (ML-134319, ML-134326, ML-134356 and ML-134357).
• Electronic drive control: The HL800-series electrical group centers on a 460 V control panel assembly — the catalog lists 00-875883-00003 and 00-916099-00006 — carrying the 460 V drive controller, a powerline filter, a time-delay relay and a ferrite.
• Three-phase power hardware: A 30 Amp./Aux., 3 Ph. contactor (00-087713-107-5) and a 480 V transformer assembly (00-916588) with its mounting brackets are documented in the same panel build.
• Transmission and bowl hardware: The base-and-pedestal group includes a transmission wrapper assembly, a top cover with its seal, a 5/16 x 5/16 x 1-1/2 transmission key, and an actuator assembly with its upper actuator pin.
• Parts shared with legacy Hobart mixers: Ball bearings BB-007-39 and BB-008-14 are listed as fitting the HL800CE along with the earlier L800, L800C, L800D, M802, M802C and M802U models.
• Beater and bowl accessories: Beyond the 80-quart beater, a 40-quart flat beater (00-916313, marked HL140-40B) is listed for the HL800/HL1400 family, and aftermarket suppliers offer stainless bowls across the same family.

Specifications

All figures below come from Hobart Form 43126 Rev. B or from supplier listings shown for this model.

• Model: Hobart HL800CE Legacy Mixer
• ML numbers: ML-134356 (current); ML-134319 (prior builds)
• Capacity: 80 quarts (the 80-quart beater 00-874654 is listed as fitting this model)
• Motor: 3 Hp, 200-400 V (Motor Assy. 00-875995-00002)
• Contactor: 30 Amp./Aux., 3 Ph. (00-087713-107-5)
• Control panel assembly: 460 V — 00-875883-00003 / 00-916099-00006
• Drive controller: 460 V — 00-916183-00002 / 00-916184-00004
• Transformer assembly: 480 V — 00-916588
• Powerline filter: 00-916327-00001 / 00-916327-00002
• Time-delay relay: 00-916642
• Ferrite: 00-916185-00001
• Main control harness: 00-916730-00001
• Transmission key: 5/16 x 5/16 x 1-1/2 (00-875419-00079)
• Ball bearings: BB-007-39 and BB-008-14
• Warning label: 00-438131-00180
• Parts catalog: Form 43126 Rev. B, September 2007, 34 pages
• Related models in the same catalog: HL800AUS (ML-134357; prior ML-134326), HL1400CE (ML-134335; prior ML-134320), HL1400AUS (ML-134336; prior ML-134330)

Operation

Form 43126 shows how the HL800-series drive and control system is organized. The 460 V control panel assembly houses the drive controller, the powerline filter, the time-delay relay, the ferrite and the main control harness, with the 30-amp three-phase contactor and the 480 V transformer assembly mounted in the same build on dedicated brackets and a drive-mount plate. Power delivery runs through the 3 Hp motor assembly into the transmission, whose wrapper, top cover and top-cover seal are itemized in the base-and-pedestal group alongside the actuator assembly and its upper actuator pin.

One ordering note from the catalog: two drive-controller numbers and two control panel assemblies are listed for the 460 V panel, and on prior MLs the 00-916184-00004 controller is ordered together with motor assembly 00-875995-00002. Confirm your ML number before ordering drive components so the numbers match your build.