WA300001

Overview

The Atosa WA300001 is the gas flex hose kit specified for the Atosa ATCM-36 cheese melter, packaged as a 3/4-inch inside diameter hose with a 48-inch (4-foot) length. Atosa builds it for propane and natural gas units, so the same kit serves kitchens on either gas supply. Rather than sourcing a hose, a valve and fittings separately, the kit arrives with the connection hardware specified together: a quick disconnect with a full port valve, a restraining device, and two elbows.

Atosa USA lists the WA300001 as the optional 3/4-inch gas connector hose kit in its accessory lineup, and it is categorized under Salamanders & Cheese Melters alongside the ATCM-36 it serves. Product listings describe it as a versatile and reliable solution for gas connection needs that supports safe and efficient gas flow, offering safe, easy gas connections for commercial kitchens with fast installation. The complete kit weighs 7.5 pounds.

Gas connections on movable countertop equipment follow a familiar pattern in commercial kitchens: a flex hose for the run, a quick disconnect so the unit can be disconnected at the supply, and a restraining device so movement stays controlled. The WA300001 bundles those pieces with the elbows needed to route the hose, all specified by Atosa for the equipment it connects.

Key Features

• Quick disconnect valve: the defining component of the kit, providing a disconnect point at the gas supply so the connected unit can be disconnected without disturbing the piping.
• Full port valve: the listing calls out the full port valve included with the quick disconnect.
• Two elbows: the kit includes two elbows for flexible installation options, which helps when the gas inlet or wall connection sits at an angle.
• Restraining device: included with the kit; the quick-disconnect valve, restraining device and two elbows are grouped together as the features that deliver a secure fit.
• 3/4" x 48" hose: a 3/4-inch inside diameter over a 48-inch length, the sizing Atosa specifies for this application.
• Propane and natural gas compatibility: one part number covers either gas type.
• 7.5 lb kit weight: the full assembly — hose, valve, elbows and restraining device — weighs 7.5 pounds.

Specifications

• Model number: WA300001
• Manufacturer part #: WA300001
• Manufacturer: Atosa USA, Inc.
• Product type: Gas flex hose kit (gas connector hose kit)
• Inside diameter: 3/4"
• Length: 48" (4 ft)
• Gas type: Propane and natural gas units
• Valve: Quick disconnect with full port valve
• Elbows: Two (2) included
• Restraining device: Included
• Weight: 7.5 lbs
• Specified equipment: Atosa ATCM-36 Cheese Melter
• Listing: Optional 3/4" gas connector hose kit

Installation & Requirements

The kit covers both ends of the gas run for a countertop unit. On the supply side, the quick disconnect with its full port valve provides the shutoff and the disconnect point at the wall — no separate valve purchase is needed since the full port valve is part of the kit. On the equipment side, the two elbows provide the flexible installation options the product is described with, letting the hose turn where a straight run would not fit or where the unit's gas inlet sits at an angle behind the countertop.

What the Kit Includes

• 3/4" x 48" gas flex hose
• Quick disconnect with full port valve
• Restraining device
• Two elbows

The restraining device completes the quick-disconnect arrangement. Because a quick disconnect allows the connected unit to be moved, the restraining device limits that movement and keeps strain off the hose and its connections. The listing groups the restraining device with the quick-disconnect valve and the two elbows as the components that give the kit its secure fit.

Since the kit is made for propane and natural gas units, the same part number covers either gas type. The 48-inch length suits countertop installations where the unit sits near the wall but still needs enough hose for the disconnect to be reachable and for the unit to be pulled out when needed.

Applications

The application Atosa specifies is the ATCM-36 cheese melter, a countertop gas unit. Kitchens adding a cheese melter to a prep line, an expo station or a finishing station can order this kit to make the gas connection under a single part number. The kit is listed directly with the ATCM-36, with the flex hose noted as 3/4" x 4' long.

The kit's format — 3/4-inch inside diameter, 48-inch length, quick disconnect, restraining device — is also the standard configuration for movable gas equipment in commercial kitchens generally. It is listed broadly as a hose kit for propane and natural gas units and appears in gas hose categories alongside connectors for other gas-fired cooking equipment. Units that get pulled out for cleaning or repositioned on the line are the typical use case for a quick-disconnect hose kit like this one. For equipment other than the ATCM-36, match the 3/4" inside diameter and gas type to the unit's connection requirements.